How do I make a ceiling fan light cover?

How Do You Change A Light bulb In A Casablanca Ceiling Fan?

There are several types of Casablanca ceiling fans, so the process of changing a light bulb will vary depending on the model you have. However, the basic steps are typically the same. First, make sure that the power is turned off to the fan. Next, remove the fan blades and set them aside.

Once the blades are removed, you should be able to access the lightbulb housing. To remove the old light bulb, simply unscrew it and replace it with a new one. Once the new light bulb is in place, screw it securely and reattach the fan blades. Finally, turn on the power and test the fan to ensure that it is working properly. Changing a light bulb in a Casablanca ceiling fan with a little patience and careful attention to detail is relatively simple.


4) COMPLEX: Turn and pull down (SLOTTED CONNECTORS)

Some have slotted connectors so that you turn it about 1/8 to 1/4 turn and then pull down, similar to the way a smoke detector is removed from its base.


Once you know the steps, it’s pretty straightforward to remove a glass ceiling cover, which will allow you to change your light bulbs or clean the covers.

Shout-out to Ann and Steve above, for making such helpful videos on removing those types of glass covers.

If you’re interested in more DIY tips like this one, check out our blog, cheers!


LED light systems are equally or more complex. I have the following model installed in my bedrooms: dl13smd3000k ip44 saa.


I found a clip on this that comes off. I suppose that will allow other similar ones to be installed.

Lawrence Leibowitz sent me this on 10 October 2017:

He asked: “How do I remove for replacement? No visible screws. Bar does rotate about 15-20 degrees in either direction so maybe that’s the key but I don’t want to force it any further.”


Recent Posts


Leave a Comment